Adventure
In this section you’ll find a range of products for adventure parks, zip lines, high ropes courses, outdoor education centres and Scouts/Guides.
Innovation in this sector includes: Monkey Hardware, SmartSnap, Quickjump/Zippey and Explorer harness.
Refine Search
-
ISC lightweight Eiger Pulleys are made from high strength aluminium and fitted with tamper-proof rivets. All ISC Eiger Pulleys are fitted with Bushings, which are ideal in lightweight applications. The RP037 is a Micro Pulley fitted with a 12kN rated bridge, a suitable alternative t..£10.38 (Plus VAT) -
RP060 SMALL SINGLE PRUSSIK PULLEY, NO BECKET. All of the ISC Prussik pulleys comply to BS EN12278 (2007) and NFPA (1983). All have tamper proof rivets, and all are available in Aluminium or Stainless Steel, with Bearings or Bushings. Bushings = high loads, low speed Bearings = ..£43.65 (Plus VAT) -
RP061 SMALL DOUBLE PRUSSICK PULLEY WITH BECKET All of the ISC Prussik pulleys comply to BS EN12278 (2007) and NFPA (1983). All have tamper proof rivets, and all are available in Aluminium or Stainless Steel, with Bearings or Bushings. Bushings = high loads, low speed Bearin..£73.06 (Plus VAT) -
RP063 - MEDIUM SINGLE PRUSSIK PULLEY, NO BECKET All of the ISC Prussik pulleys comply to BS EN12278 (2007) and NFPA (1983). All have tamper proof rivets, and all are available in Aluminium or Stainless Steel, with Bearings or Bushings. Bushings = high loads, low speed Bearings = ..£51.76 (Plus VAT) -
Medium Single Prussik Pulley with FIXED WHEEL, Stainless Steel. Can be used as a Shear Reduction Pulley – NOW CE Approved. Conformity: CE Strength rating (MBS): 50kN Body material: Stainless steel Wheel material: Stai..£59.62 (Plus VAT)
-
RP064 - MEDIUM DOUBLE PRIUSSIK PULLEY, WITH BECKET All of the ISC Prussik pulleys comply to BS EN12278 (2007) and NFPA (1983). All have tamper proof rivets, and all are available in Aluminium or Stainless Steel, with Bearings or Bushings. Bushings = high loads, low speed Be..£85.99 (Plus VAT) -
RP065 - MEDIUM SINGLE PRUSSIK PULLEY WITH BECKET All of the ISC Prussik pulleys comply to BS EN12278 (2007) and NFPA (1983). All have tamper proof rivets, and all are available in Aluminium or Stainless Steel, with Bearings or Bushings. Bushings = high loads, low speed Bearings ..£53.07 (Plus VAT) -
RP066 - LARGE SINGLE PRUSSIK PULLEY, NO BECKET All of the ISC Prussik pulleys comply to BS EN12278 (2007) and NFPA (1983). All have tamper proof rivets, and all are available in Aluminium or Stainless Steel, with Bearings or Bushings. Bushings = high loads, low speed Bearings = low lo..£62.23 (Plus VAT) -
RP066A - LARGE SINGLE PRUSSIK PULLEY All of the ISC Prussik pulleys comply to BS EN12278 (2007) and NFPA (1983). All have tamper proof rivets. Heavy duty prussik pulley with bushings (high loads/low speeds). Can be used with the ALF™ Climb Assist Auto-Locking Pulley. ..£33.84 (Plus VAT) -
RP067 - LARGE DOUBLE PRUSSIK PULLEY WITH BECKET All of the ISC Prussik pulleys comply to BS EN12278 (2007) and NFPA (1983). All have tamper proof rivets, and all are available in Aluminium or Stainless Steel, with Bearings or Bushings. Bushings = high loads, low speed Bearings =..£102.48 (Plus VAT) -
RP069 - EXTRA LARGE SINGLE PRUSSIK PULLEYS All of the ISC Prussik pulleys comply to BS EN12278 (2007) and NFPA (1983). All have tamper proof rivets, and all are available in Aluminium or Stainless Steel, with Bearings or Bushings. Bushings = high loads, low speed Bearings = low loads,..£64.54 (Plus VAT)
-
Extended side bars keep the rope in place, preventing the rope from creeping inwards and causing unwanted locking. Body material: Stainless Steel Weight: 597g Finish: Polished MBS: 80kN Individual Serial Number:..£29.07 (Plus VAT) -
ISC Rope grabs are CNC machined high stength aluminium extrusion and have a non-aggressive cam-face design and so are suitable for use without a Shock Absorber, when used in accordnace with EN353-2 on EN1891-A rope. Fixed axle version. Strength rating (MBS): Rope depe..£40.29 (Plus VAT) -
The RP209 Rope grab has a Pip Pin Axle, allowing the Rope grab to be easily fitted to or removed from the working rope line at any point- without the need for the user to detatch from their Harness. The Pip Pin is a 'Push-button' device, allowing the user to quickly and efficiently secure the device..£47.99 (Plus VAT) -
ISC Hand Ascenders are fitted with Stainless Steel cams with cones (rather than spikes), to minimise rope wear. All ISC Ascenders have both primary and secondary attachment holes. All ISC Hand Ascenders are manufactured from solid aluminium extrusion for maximum durability, with moulded comfort h..£59.65 (Plus VAT) -
ISC Hand Ascenders are fitted with Stainless Steel cams with cones (rather than spikes), to minimise rope wear. All ISC Ascenders have both primary and secondary attachment holes. All ISC Hand Ascenders are manufactured from solid aluminium extrusion for maximum durability, with moulded comfort h..£59.65 (Plus VAT) -
STRYDER™ Foot Ascender During the design and development of the ISC STRYDER™ durability and fucnctionality were at the top of the list of priorities. The STRYDER™ uses tried and tested geometry to provide a smooth upward movement and positive engagement on the rope. STRYDER™ uses t..£42.28 (Plus VAT) -
The ISC Chest Ascender has been designed for use on a full body harness, light and compact, it’s ideal for use in Rope Access work. The cam is spring loaded and fitted with a catch mechanism to allow for one-handed operation whilst attaching/removing the device to/from the rope. The spikes on ..£32.33 (Plus VAT) -
ISC Hand Ascenders are fitted with Stainless Steel cams with cones (rather than spikes), to minimise rope wear. All ISC Ascenders have both primary and secondary attachment holes. All ISC Hand Ascenders are manufactured from solid aluminium extrusion for maximum durability, with moulded comfort h..£59.65 (Plus VAT) -
ISC Hand Ascenders are fitted with Stainless Steel cams with cones (rather than spikes), to minimise rope wear. All ISC Ascenders have both primary and secondary attachment holes. All ISC Hand Ascenders are manufactured from solid aluminium extrusion for maximum durability, with moulded comfort h..£59.65 (Plus VAT) -
The SmartSnap is designed for use on Ropes Courses, where 100% Attachment is required. The SmartSnap offers 100% attachment through the use of innovative 'Key Lock' mechanisms. To move from one element to another, the user must lock in a second connector, before being able to unlock the first connec..£170.00 (Plus VAT) -
The ALF Climb Assist Pulley was designed for the Challenge Course industry, as a simple method of protecting users on vertical climbs incorporated into a course. The ALF is also a protection solution for workers on towers, masts, wind turbines and even in construction applications where a cost-ef..£251.60 (Plus VAT) -
The world famous Rocker is made in the UK by ISC and can be used in Fall Protection system, a Work Positioning system or even as a mid-line anchor point. It can be fitted to and removed from the working rope at any point. It can be used (in accordance with EN353-2) hands-free when travelling..£57.50 (Plus VAT) -
One-way locking bearings are ideal for lifting & lowering applications. The wheel locks is one direction to provide maximum friction, which allows for greater control while lowering. When operated in the opposite direction, the wheel is free-running to reduce friction to a minimum, for greater e..£118.80 (Plus VAT) -
The RP701 has a Bushed, standard free-running wheel (non-locking). Body material: Aluminium Wheel material: Aluminium Individual serial number: Yes Finish: Anodised Weight: 658g Approval: CE EN 12278 ..£51.95 (Plus VAT) -
The RP702A1 has a Bushed, standard free running wheel (non-locking) Body material: Aluminium Wheel material: Aluminium Individual serial number: Yes Finish: Anodised Weight: 664g Approval: CE EN 12278 ..£102.47 (Plus VAT) -
The RP703 has Bushed, standard free running wheels (non-locking). Body material: Aluminium Wheel material: Aluminium Individual serial number: Yes Finish: Anodised Weight: 908g Approval: CE EN 12278 ..£120.33 (Plus VAT) -
One-way locking bearings are ideal for lifting and lowering. The wheel is locked in one direction, to create maximum friction when lowering/releasing. In the opposite direction the wheel runs freely, for minimum friction for lifting/hauling/tensioning. Body material: Aluminium ..£116.12 (Plus VAT) -
One-way locking bearings are ideal for use in lifting and lowering applications. The wheels are locked in one direction, to provide maximum frictions, for use when lowering. In the opposite direction the wheels run freely, to minimise friction when lifting/hauling. Body material: ..£135.26 (Plus VAT) -
The NEW D4 work/rescue descender features a unique and innovative progressive cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam, to provide a mechanical advantage and smoother control. The D4 has a 240kg..£119.60 (Plus VAT)